Thursday 23 October 2014

Alouette III G-Car


This time it's the Alouette G-Car in the spotlight, and just I did with the K-Car in this post I will highlight the steps needed the complete Eureka Miniatures' resin and white metal model. 

The Alouette III helicopter was used by the armed forces of the state of Rhodesia during the Rhodesian Bush War. In its role as a gunship it was known as the K-Car, while as a troop transport it was called the G-Car. The Alouette G-Car could transport a stick of four soldiers and was armed with twin .30 cal machine-guns, making it a crucial element in Fireforce operations.

Readers may wish to  consult the post detailing the construction of the K-Car for steps that I've not covered in this one.


After cleaning up the fuselage casting, it's best to test fit seats and figures so that you are clear about where everything is located within the helicopter. Here's a shot of who goes where in the front row. Note how the two troopies are seated facing the back. Although G-Cars could have various seating arrangements, I've recreated what I believe is the most common layout.


The back row and bench seat test fitted. Note the MAG gunner in the left of the photo.


It's a little squeezy, but all the figures will fit comfortably inside.


The clear canopy must be trimmed and then sanded to fit. I've removed the front door and the sliding door from the left side.


....and on the right side just the sliding door is removed. It's important to do this now to ensure that internal fittings fit properly inside the crew compartment. 


Once it's clear where everything goes, you can start gluing elements together. Start with the foot-rests on both sides of the crew cabin.


Glue in the two seats as shown, plus the bench seat and instrument console. Be sure that the instrument console does not foul the clear canopy, and if it does sand the bottom until it fits inside properly.


The easiest way to make sure the door gunner mates both with the seat and his guns is to glue his bottom half in place first. The figure sits on the edge of the bench and there is an indentation on his backside so it should be clear where to glue.


Here the ammo bin is test fitted. The back support of the ammo bin lines up with a scribed line on the floor of the crew compartment. The gunner's left foot should be on the foot-rest.


Crew compartment with elements in place are undercoated along with the figures and painting has begun.


Interior is painted grey and dry-brushed with a light grey, seats as well as the disembodied legs are painted. Paint the rear of the ammo bin, and finish painting the rest of the figures.


The gunner's upper half as well as the ammo bin are glued into place. I use a 5 minute epoxy for this, giving me time to ensure that everything is fitted together properly. The linked ammunition coming out of the top of the bin will fit snugly onto the insides of the guns.
You can glue the pilot in at this stage, too.


Once the gunner and pilot are in place, glue in the four-man stick. It's wise to test fit them with the canopy in place to make sure everything fits inside.


Here's the other side. 


I gave the canopy a wash in some soapy water to remove any grease and dirt accumulated during sanding.


Canopy glued in place.


Masking tape from the hobby shop is once again used to paint the canopy framing. I've added the missing canopy frame with a thin piece of metal cut from a tin can lid.


The masking ensures a much neater finish than hand painting. I used a Games Workshop acrylic black.


A thin line of brown is hand-painted within the black lines.


With the canopy painted I then glued on the wheels and other external elements.


I bored a hole for the rod that I use as a flight stand. The ammo bin did not throw out the centre of balance, so the hole is along the centre line, just aft of the crew compartment.


Some putty was used to smooth the join of the tail elements. 


Here's the whole lot test fitted to the flight stand.


If you use the clear plastic rotor then a small collar is needed to raise it a little off the top of the rotor.
I've used a little piece of brass rod. You will also need a small nail or suchlike to hold the rotor onto the engine.


Camouflage paint has been applied and the rotor is on! The gunner looks pretty mean operating the twin MGs.





In constructing and painting these kits I've found that it's important to be methodical and take one step at a time. Things that fly are generally more tricky than tanks and AFVs to construct, but the end result is some impressive hardware.

More figures, models and madness soon!


19 comments:

  1. Good to see you back Kosta. Looks fantastic. Wish mine was as good as yours. Check it out. http://noduffgamer.blogspot.com.au/

    ReplyDelete
    Replies
    1. You've gotten your Alouette up and on the tabletop, which is the main thing. I think it looks good and is part of an impressive force, too.
      Thanks for looking in!

      Delete
    2. Are we going to see anything new for Cancon?

      Delete
    3. For sure. I'm working on a couple of sets at the moment, including some bits and pieces for the Bush Wars range.

      I have been getting back into 1/35 plastic modelling, which is actually my first love (even sculptors need a hobby!) but there's still lots of 28mm sculpting to be done yet.

      Delete
    4. Excellent! looking forward to it.

      Delete
  2. Looks great - a very methodical step-by-step!

    ReplyDelete
  3. thats look awesome, makes me what to game bushwars :-)

    ReplyDelete
    Replies
    1. Kosta have you done a step by step painting guide for you bush war figures?? Ive just brought a large amount from Nic and Love the way yours look, any chance of you doing one? thanks

      Delete
    2. Hi Bradley, well I do need to paint some of the RAR that I made earlier this year. I'll take some in-progress shots when I do & post the colour combos that I use - in the not too distant future.

      Delete
    3. thank you, and keep up the great work ;-)

      Delete
    4. Hi I was wondering if there is any update when we might see the in progress shots of how you paint the RAR. I too would very much like to see how you paint them up and what colours you use.

      Delete
    5. I'm working on a couple of painting tutorials at the moment so will get something useful up soon.

      Delete
  4. Awesome, I particularly like the Technician/Gunner.

    ReplyDelete
    Replies
    1. Thanks Ash. I'm sure you're familiar with the photo that I used as reference for the gun-tech!

      Delete
  5. Hi Kosta
    Great Fire Force figures but all troops should have their combat caps tucked in their shirts. All weapons should be in the lap as you have some of the figures and yes pointing to the right. Never pointing upwards as an AD could damage a rotor blade etc! The Tech and pilot are brilliant. There were three phases of helicopter drills. Seating you have is the last phase with MAG gunner on right at rear of helicopter. Stick leader would sit next to him behind the pilot so he could look forward. Also stick leader would have head phones on so he could listen to the Fire Force talk in. Helicopters Dark Earth Dark Green. Great stuff Kosta brilliant figures.

    ReplyDelete
    Replies
    1. Hi John, thanks for taking the time to comment.

      I sculpted these figures well before the two RLI sets that you advised me on, so unfortunately I was not able to pick your brain re details such as the caps.
      In retrospect it makes complete sense that any light headgear would be blown off by the prop wash - but I live and learn!

      I had read that US troops during the Vietnam war always had their muzzles pointed downwards when riding in helicopters, so I was aware that weapon orientation was a real issue. I also needed to balance that with fitting so many figures in a pretty tight space, and in the absence of more info at the time of sculpting, the results are the absolute best I could do with the resources available to me at the time.

      I'm always on the lookout for more reference though, and happy to be corrected when I get it wrong!

      Kosta





      Delete
  6. Hello Kosta...when do you think we'll see the next RLI set (action) ;-) ony ask cos I've now brought every other figure in this range ;-)

    ReplyDelete
  7. Hi Kosta
    I came across your Rhodesian War Alloutte Helicopter whilst researching a museum display of a real one. We were trying to find pictures of the machine gun mounting so that it could be recreated.

    Do you know who made this kit? Was it yourselves? I would love to be put in touch with the person or company who made this as they may have photographs of the original real life helicopter. What reference did you use for the gun mount?

    Can you assist us with this?

    By the way I was a SAAF officer during the South African Bush War and regularly flew in the Alloutte 111 including in the gunship which had a 20mm cannon. When firing it would push the aircraft sideways. Maybe you will do a SAAF one someday.

    Kind regards

    Jeremy

    ReplyDelete
    Replies
    1. Hi Jeremy
      The model is a collaboration between myself and my friend Les.
      I was responsible for the weapons/weapons mounts and crew/passenger figures.

      If you email Eureka Miniatures at: nicr@eurekamin.com.au
      I'll endeavour to dig up my research and photos used and get in touch with you.

      Les made the master of the helicopter airframe, canopy etc.
      You can visit his website at: uncleles.net

      Cheers,

      Kosta

      Delete