Sunday, 16 November 2014

Baggy trousers part 2 : More 28mm Soviet Motorised Infantry

I can't believe that it was back in January that I posted photos of the first set of 1980s Sov troops.  
The year has flown by, but here is the follow-up set, wearing the Soviet tropical hat - a very popular item of headgear for Soviet troops in Afghanistan.

These figures also represent Motorised Infantry, so their kit is otherwise identical to the first bunch - body armour, marching boots and chi-com style chest rigs, though some have belts and Y-straps.

These guys have not been dropped off at Eureka for the mould-making process yet; I still need to add some red stars to their hats and recite some spells over them, but they're nearly there.

I'm thinking the heavy weapons crews will be next, but that will have to wait 'til next year.

Thursday, 23 October 2014

Alouette III G-Car

This time it's the Alouette G-Car in the spotlight, and just I did with the K-Car in this post I will highlight the steps needed the complete Eureka Miniatures' resin and white metal model. 

The Alouette III helicopter was used by the armed forces of the state of Rhodesia during the Rhodesian Bush War. In its role as a gunship it was known as the K-Car, while as a troop transport it was called the G-Car. The Alouette G-Car could transport a stick of four soldiers and was armed with twin .30 cal machine-guns, making it a crucial element in Fireforce operations.

Readers may wish to  consult the post detailing the construction of the K-Car for steps that I've not covered in this one.

After cleaning up the fuselage casting, it's best to test fit seats and figures so that you are clear about where everything is located within the helicopter. Here's a shot of who goes where in the front row. Note how the two troopies are seated facing the back. Although G-Cars could have various seating arrangements, I've recreated what I believe is the most common layout.

The back row and bench seat test fitted. Note the MAG gunner in the left of the photo.

It's a little squeezy, but all the figures will fit comfortably inside.

The clear canopy must be trimmed and then sanded to fit. I've removed the front door and the sliding door from the left side.

....and on the right side just the sliding door is removed. It's important to do this now to ensure that internal fittings fit properly inside the crew compartment. 

Once it's clear where everything goes, you can start gluing elements together. Start with the foot-rests on both sides of the crew cabin.

Glue in the two seats as shown, plus the bench seat and instrument console. Be sure that the instrument console does not foul the clear canopy, and if it does sand the bottom until it fits inside properly.

The easiest way to make sure the door gunner mates both with the seat and his guns is to glue his bottom half in place first. The figure sits on the edge of the bench and there is an indentation on his backside so it should be clear where to glue.

Here the ammo bin is test fitted. The back support of the ammo bin lines up with a scribed line on the floor of the crew compartment. The gunner's left foot should be on the foot-rest.

Crew compartment with elements in place are undercoated along with the figures and painting has begun.

Interior is painted grey and dry-brushed with a light grey, seats as well as the disembodied legs are painted. Paint the rear of the ammo bin, and finish painting the rest of the figures.

The gunner's upper half as well as the ammo bin are glued into place. I use a 5 minute epoxy for this, giving me time to ensure that everything is fitted together properly. The linked ammunition coming out of the top of the bin will fit snugly onto the insides of the guns.
You can glue the pilot in at this stage, too.

Once the gunner and pilot are in place, glue in the four-man stick. It's wise to test fit them with the canopy in place to make sure everything fits inside.

Here's the other side. 

I gave the canopy a wash in some soapy water to remove any grease and dirt accumulated during sanding.

Canopy glued in place.

Masking tape from the hobby shop is once again used to paint the canopy framing. I've added the missing canopy frame with a thin piece of metal cut from a tin can lid.

The masking ensures a much neater finish than hand painting. I used a Games Workshop acrylic black.

A thin line of brown is hand-painted within the black lines.

With the canopy painted I then glued on the wheels and other external elements.

I bored a hole for the rod that I use as a flight stand. The ammo bin did not throw out the centre of balance, so the hole is along the centre line, just aft of the crew compartment.

Some putty was used to smooth the join of the tail elements. 

Here's the whole lot test fitted to the flight stand.

If you use the clear plastic rotor then a small collar is needed to raise it a little off the top of the rotor.
I've used a little piece of brass rod. You will also need a small nail or suchlike to hold the rotor onto the engine.

Camouflage paint has been applied and the rotor is on! The gunner looks pretty mean operating the twin MGs.

In constructing and painting these kits I've found that it's important to be methodical and take one step at a time. Things that fly are generally more tricky than tanks and AFVs to construct, but the end result is some impressive hardware.

More figures, models and madness soon!

Wednesday, 23 July 2014

Italeri 1/35 scale BMW R 75 with sidecar


I began building and detailing this 1/35 scale Italeri BMW with sidecar many years before the latest-generation kits were available. The etched nickel parts are from The Show Modelling, one of the very first companies to produce aftermarket sets back in the day. Unfortunately Show Modelling's offering only provided enough etched spokes for two wheels and so for the sidecar wheel and spare wheel I have adapted some etched brass spokes intended for a WW1 biplane.

Annoyingly, it was well into the build before I got my hands on some decent reference, Wings & Wheels Publications photo book on the subject.

After the wee beastie had spent some y-e-a-r-s in a box I picked up (or more precisely ordered off the internet, which had been erm, invented in the meantime) the new Great Wall kits, but somehow I knew that I had to complete the Italeri kit that I'd started all that time ago. I therefore determined that I would complete the model and do so without looting any parts from the more modern BMW kits that I had acquired.

I was originally planning a Fallschirmjager crew for the bike but changed my mind and decided on an Eastern Front theme and have also partially sculpted the rider. The legs and head are from a Dragon figure set, my usual Green Stuff/Milliput mix for the rest of him.

I have a bunch more 1/35 scale projects in the pipeline which I hope to get stuck into between my 28mm sculpting duties.

A big thank you to my friend Vinnie who took the photos in this post. He usually shoots much more action-packed scenes and you can check out his photography site  here.